# Auto fill two username fields

**URL:** <https://forum.kee.pm/t/auto-fill-two-username-fields/3137>\
**Category:** Kee browser extension\
**Created:** [August 4, 2020, 2:17pm UTC](https://forum.kee.pm/t/auto-fill-two-username-fields/3137 "2020-08-04T14:17:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![throwawayuser](https://forum.kee.pm/letter_avatar_proxy/v4/letter/t/ee59a6/32.png) [@throwawayuser](https://forum.kee.pm/u/throwawayuser)\
**Post date:** [August 4, 2020, 2:17pm UTC](https://forum.kee.pm/t/auto-fill-two-username-fields/3137/1 "2020-08-04T14:17:34Z")

</div>

I want to use Kee to fill out a login form that has two username-type fields, one of which takes the name of my company, the second one wants to use my username, the third field contains my password. You can look at the login form here: [https://login.hrworks.de](https://login.hrworks.de)  
Right now, I cannot use it. Kee doesn’t remember the company name, but fills the form with my username. I tried using the advanced editor and stated the first field and its designated value in the form, but to no avail.  
How can I achieve this?

Thanks in advance,

jolo

---

<div class="post-metadata">

**Author:** ![blgo](https://forum.kee.pm/user_avatar/forum.kee.pm/blgo/32/745_2.png) [@blgo](https://forum.kee.pm/u/blgo)\
**Post date:** [August 4, 2020, 6:07pm UTC](https://forum.kee.pm/t/auto-fill-two-username-fields/3137/2 "2020-08-04T18:07:02Z")

</div>

Hi jolo  
You could try to start here:

> [@Customise appearance and behaviour with settings / options / preferences](https://forum.kee.pm/t/customise-appearance-and-behaviour-with-settings-options-preferences/2366):
>
> Customisation areas Because there are multiple apps involved in the complete Kee password management experience, there are a few important places to look when you want to configure your experience. While this allows for some powerful customisation features it might take a little bit of thought to determine where to look for the setting you need. The guide below will help you decide where to look for the setting you want to change. The first section applies to everyone that uses the desktop brow…

If you are using KeePass, go to the section **“Edit entry” dialog** or if you use Kee Vault **Entry Browser form settings**.

Using these options you can create custom fields that will populate any aditional fields in your login forms.

I haven’t tried to create multiple fields: only had to use this setting to customise the field id and field name for the Amazon AWS login console throught KeeVault.

I think it should work just fine if you create another login field, for example: “identity” and configure the correc field t id and field name on it.

If you need more help finding these fields just ask! 🙂

---

<div class="post-metadata">

**Author:** ![blgo](https://forum.kee.pm/user_avatar/forum.kee.pm/blgo/32/745_2.png) [@blgo](https://forum.kee.pm/u/blgo)\
**Post date:** [August 5, 2020, 2:27am UTC](https://forum.kee.pm/t/auto-fill-two-username-fields/3137/3 "2020-08-05T02:27:05Z")

</div>

Check this thread too, it shows the screens you need to use: [KeePass + Kee + ING Diba online banking login page?](https://forum.kee.pm/t/keepass-kee-ing-diba-online-banking-login-page/2376/17)